Price:
US$117.99
3D printed parts to fix and protect the equipment in the sky.
Exquisite appearance design, strong and durable structure.
Chamfering of the arm and the fuselage, smooth and not scratching.
The package includes Mark4 5 inch Frame Kits 4pcs 2205 Motor 4pcs 30A BLHeli_S ESC F4 V3S Flight Controller 5045 Propeller Kits.
Perfectly replacemet for DJI Sky.
Specifications:
Item Name: Mark4 5 inch FPV Carbon Fiber Frame
Frame Type: H type
Maximum Support Blade: 5inch
Wheelbase: 224mm
Size: 138*176mm
Weight: 120g (Including 3D Printed Parts)
Floor Thickness: 2.5mm
Top Plate Thickness: 2.5mm
Side Plate Thickness: 2.5mm
Splint Thickness: 2mm
Thickness of Front and Rear Protective Frame: 2mm
Arm Thickness: 5mm
Recommended Configuration:
Flight Control: RF/Kiss/F4/F3/F7
Motor: 2205/2206/2207/2207.5/2305/2306/2306.5
ESC: 30A-50A
Battery: 4S 1500mAh ~ 6S 1300mAh
Item Name: F4 V3 Flight Controller
Size: 36x36mm
Mounting Holes: 30.5×30.5mm
STM32 F405 MCU
Dshot Support
Drag and Drop OSD Configured via Betaflight
Gyro: BMI270
SBUS / PPM AND Spketrum DSMX ports
Micro Memory Card Blackbox
Baro (BMP280)
BEC: 5v3a 9V3A
On-board Video Filters (only 5V to VTX and Camera)
Item Name: 30A ESC:
Input Voltage: 2-6 S Lipo
NO BEC
Continue Current: 30A, Burst Current: 35A up to 10S
Size: 35 * 17mm
Weight: 9g (Include Power and Signal Wire)
Support Muted mode, Oneshot125, Oneshot42 and Multshot and DSHOT
Main IC: SILABS EFM8BB21F16, MCU run 48MHz
MOS: Both low and high side fets are Nfets
Item Name: 2205 Motor
Framework: 12N14P
No. of Cells: 3-4S
Length: 31.7mm
Shaft: M5
KV: 2300
Max Thrust: 1024g
Diameter: 27.9mm
Propeller Suggested: HQ 5045 BN
Weight: 30g
Package Information:
Package Size: 25*25*6cm
Package Weight: 296g
Plastic Package
Package List:
1* FPV Carbon Fiber Frame
4* 2205 Motor
4* BLHeli_S 30A ESC
1* FC Flight Controller
4* 5045 Propeller